Firmware
| Product Name | GX-20 |
|---|---|
| Title | GX-20 Firmware(Ver 1.03) |
| 1. Before upgrading the firmware ● Make sure you use fully charged batteries. It is recommended that you use an AC adaptor for cameras that have an AC adaptor. If fully charged batteries are not used, or the power is cut during a firmware upgrade, the mainboard may be seriously damaged, resulting in camera malfunction. If camera malfunction is caused during a firmware upgrade for the reasons given above, the mainboard may have to be serviced by a Samsung service centre, which may result in major repair charges. ● Before upgrading the firmware, make sure that you format the memory card on your PC or camera and then download the necessary firmware file. Since the MMC(MultiMediaCard) may not be suitable for firmware upgrade, depending on the model, check before you proceed with upgrading the firmware. ● Download the firmware file into the root directory of the memory card. Also check that the firmware file downloaded has the correct file name for the camera model. ● To upgrade firmware there should be sufficient free space on the memory card for the size of he firmware file. If the firmware upgrade is not completed because of insufficient memory space, delete some of the files saved on the memory to secure more free space and then try again. ● Do not operate the camera, remove the batteries, or cut the power while upgrading firmware. Operate the camera only after the firmware upgrade is complete. ● Once the firmware is upgraded, it is not possible to restore the earlier version of the firmware. When the firmware is upgraded, all the camera settings are set to their default values. Since all the files stored in the internal memory (image files, MP3 files or PMP files) will be deleted, ensure that files are copied to other storage devices before upgrading firmware. ● Before downloading firmware, make sure you read the Software Use Terms Conditions. The act of downloading the firmware is taken to mean that you have agreed to the Software Use Terms and Conditions. ※ Should you need further detailed information, or if you experience difficulty in upgrading firmware, do not proceed with the process on your own. Visit a Samsung service centre near you. 2. Improvement Firmware Version(1.03) incorporates the following improvements. ● Improved OIS (Shake Reduction) accuracy. 3. How to Upgrade the Firmware [Caution] If the batteries are completely discharged during the firmware upgrade, camera malfunction may occur. Make sure to use fully charged batteries for safety. Ensure that you format the SD card before using it, and then save the firmware file on the formatted SD card. 1) Download the firmware file into the root directory of the SD memory card. Check that the firmware file name is "fwgx20.bin"..  2) Insert fully charged batteries into the camera. 3) Insert the SD card on which the firmware file is to be saved.  4) Close the SD card cover of the camera.  5) While pressing down the MENU button, turn the main switch ON.  6) When the following symbol appears on the LCD monitor, select YES, and then press the OK button.  7) The firmware upgrade begins as in the picture below. It takes about 60 seconds. * Do not turn off the camera.  8) When the firmware upgrade is successfully carried out, the message “COMPLETE” appears. Turn the main switch of the camera to OFF. 
|
|
